Regulators
Showing all 32 results
-
ITT ConoflowITT Conoflow FR95 Airpak Filter-Regulator, Aluminum Low Pressure Regulator
The ITT Conoflow FR95 Series Airpak® Filter-Regulator is used to provide clean, accurate air to instruments, valves, positioners, transducers, and other pneumatic control devices. The design provides high flow capability, durable materials of construction and bubble-tight shutoff. The FR95 low pressure regulator has a maximum supply pressure capability of 250 psig (1724 kPa) with control output settings of 0-25 psig, 0-35 psig, 0-60 psig, and 0-125 psig (0-172 kPa, 0-241 kPa, 0-414kPa, and 0-862 kPa). This light-weight filter-regulator boasts a high flow delivery rate and excellent droop characteristic. The FR95 regulator is offered with 1/4″ NPT inlet and outlet ports, two outlet gauge ports, all aluminum construction, and has a black anodized exterior for superior corrosion resistance.
-
ITT ConoflowITT Conoflow GFH45 Airpak Filter-Regulator, Brass Low Pressure Regulator
The ITT Conoflow GFH45 Series Airpak® Filter-Regulator is used to provide clean, accurate air to instruments, valves, positioners, transducers, and other pneumatic control devices. The design provides high flow capability, durable materials of construction and bubble-tight shutoff. The GFH45 low pressure regulator has a maximum supply pressure capability of 300 psig (2.07 MPa) with control output settings of 0-25 psig, 0-60 psig, and 0-125 psig (0-172 kPa, 0-414 kPa, and 0-862 kPa). This brass filter-regulator boasts a high flow delivery rate and excellent droop characteristic. Th GFH45 regulator is offered with 1/4″ NPT inlet and outlet ports, two outlet gauge ports, and brass construction.
The ITT Conoflow GFH45 Series Airpak® Filter-Regulator is used to provide clean, accurate air to instruments, valves, positioners, transducers, and other pneumatic control devices. The design provides high flow capability, durable materials of construction and bubble-tight shutoff. The GFH45 low pressure regulator has a maximum supply pressure capability of 300 psig (2.07 MPa) with control output settings of 0-25 psig, 0-60 psig, and 0-125 psig (0-172 kPa, 0-414 kPa, and 0-862 kPa). This brass filter-regulator boasts a high flow delivery rate and excellent droop characteristic. Th GFH45 regulator is offered with 1/4″ NPT inlet and outlet ports, two outlet gauge ports, and brass construction.
-
ITT ConoflowITT Conoflow GH04 Cushion Loading Regulator
The ITT Conoflow GH04 Cushion Loading Regulator is an all aluminum, light-weight, compact unit designed for industrial and commercial services requiring a constant, regulated air pressure. The GH04 is primarily used as a cushion loading device for piston actuators, but the high exhaust capabilities make it suitable for many other applications. This model offers versatility in line mounting and gauge mounting with 1/4″ NPT dual input and output connections. It is available with a 0-60 psi (0-414 kPa) regulated pressure range, Buna-N elastomers, and the controlling ball valve is Viton.
-
ITT ConoflowITT Conoflow GH10 Brass Manual Loading Regulator
The ITT Conoflow GH10 Manual Loading Regulator is a precision unit designed for use in laboratory environments, remote loading of pneumatic devices, speed changers, and other general purpose applications. This GH10 model has a brass bonnet.
-
ITT ConoflowITT Conoflow GH10 Brass Manual Loading Regulator with Aluminum Bonnet
The ITT Conoflow GH10 Manual Loading Regulator is a precision unit designed for use in laboratory environments, remote loading of pneumatic devices, speed changers, and other general purpose applications. This GH10 model has an aluminum bonnet.
-
ITT ConoflowITT Conoflow GH10 Manual Loading Regulator with 303 Stainless Steel or 316 Stainless Steel Internals
The ITT Conoflow GH10 Manual Loading Regulator is a precision unit designed for use in laboratory environments, remote loading of pneumatic devices, speed changers, and other general purpose applications. This GH10 model is available with either 303 stainless steel internals, or 316 stainless steel internals for applications in harsh environments.
-
ITT ConoflowITT Conoflow GH20 Brass Service Pressure Reducing Regulator
The ITT Conoflow GH20 Service Pressure Reducing Regulator is a rugged unit with flow capacities, and performance characteristics which allow it to operate in both instrument, and industrial applications. This GH20 model has a brass bonnet.
-
ITT ConoflowITT Conoflow GH20 Brass Service Pressure Reducing Regulator with Aluminum Bonnet
The ITT Conoflow GH20 Service Pressure Reducing Regulator is a rugged unit with flow capacities, and performance characteristics which allow it to operate in both instrument, and industrial applications. This GH20 model has an aluminum bonnet.
-
ITT ConoflowITT Conoflow GH20 Service Pressure Reducing Regulator with 303 Stainless Steel or 316 Stainless Steel Internals
The ITT Conoflow GH20 Service Pressure Reducing Regulator is a rugged unit with flow capacities, and performance characteristics which allow it to operate in both instrument, and industrial applications. This GH20 model is available with either 303 stainless steel internals, or 316 stainless steel internals for applications in harsh environments.
-
ITT ConoflowITT Conoflow GH20VT 316 Stainless Steel Vacuum Service Regulator
The ITT Conoflow GH20VT 316 Stainless Steel Vacuum Regulator is used to provide a regulated vacuum by accurately regulating the sub-atmospheric pressure of a vessel being evacuated. This series of vacuum service regulators is especially suited for laboratory work, and test stands for simulation of high altitude conditions.
-
ITT ConoflowITT Conoflow GH20VT Brass Vacuum Service Regulator
The ITT Conoflow GH20VT Brass Vacuum Regulator is used to provide a regulated vacuum by accurately regulating the sub-atmospheric pressure of a vessel being evacuated. This series of vacuum service regulators is especially suited for laboratory work, and test stands for simulation of high altitude conditions.
-
ITT ConoflowITT Conoflow GH21XT Fixed, Constant, Differential Pressure Regulator
The ITT Conoflow GH21XT Fixed Differential Pressure Regulator is used to maintain a constant pressure differential across a variable or fixed orfice, providing a constant, or fixed, flow rate regardless of variations in upstream or downstream pressure. Various configurations of this differential pressure regulator are available based on the needs of the application. The GH21XT maintains a fixed differential of approximately 3 psi (21 kPa) across the bonnet, and outlet connection. Adjustment of the flow rate is made downstream of the system. This model constant differential pressure regulator is normally used with a flow rate indicator having a built-in needle valve.
-
ITT ConoflowITT Conoflow GH30 Back Pressure Regulator
The ITT Conoflow GH30 Back Pressure Regulator is used to maintain a constant upstream pressure of gas, vapor or liquid. Designed for accurate regulation under low flow conditions, this model back pressure regulator is widely used for protection of analysis instrumentation, or as a relief valve in supply pressure lines to control devices. The GH30 back pressure regulator is available in a brass and aluminum combination, or all stainless steel construction. This model has a Buna-N diaphragm assembly as standard, and a Teflon / Buna-N / Teflon diaphragm assembly is used in the stainless steel models for corrosive services. Regulated pressure ranges for this back pressure regulator are 0-3 psi, 5 psi, 15 psi, 25 psi, 35 psi, 50 psi, and 125 psi (0-21 kPa, 35 kPa, 103 kPa, 241 kPa, 345 kPa, and 862 kPa).
-
ITT ConoflowITT Conoflow GH40 Brass Service Pressure Reducing Regulator
The ITT Conoflow GH40 Service Pressure Reducing Regulator is for applications where positive shutoff, and minimum air consumption are required. These rugged pressure regulators have flow capacities, and performance characteristics which allow them to operate in both instrument, and industrial applications. This model service pressure reducing regulator has a Buna-N diaphragm assembly, and regulated output pressure ranges of 0-25 psi, 60 psi, and 125 psi (0-172 kPa, 414 kPa, and 862 kPa).
-
ITT ConoflowITT Conoflow GH40 Brass Service Pressure Reducing Regulator with Aluminum Bonnet
The ITT Conoflow GH40 Service Pressure Reducing Regulator is for applications where positive shutoff, and minimum air consumption are required. These rugged pressure regulators have flow capacities, and performance characteristics which allow them to operate in both instrument, and industrial applications. This model service pressure reducing regulator has an aluminum bonnet, a Buna-N diaphragm assembly, and regulated output pressure ranges of 0-25 psi, 60 psi, and 125 psi (0-172 kPa, 414 kPa, and 862 kPa).
-
ITT ConoflowITT Conoflow GH40 Service Pressure Reducing Regulator with 302 Stainless Steel or 316 Stainless Steel Internals
The ITT Conoflow GH40 Service Pressure Reducing Regulators are for applications where positive shutoff, and minimum air consumption are required. These rugged pressure regulators have flow capacities, and performance characteristics which allow them to operate in both instrument, and industrial applications. These models have either 302 stainless steel internals, or 316 stainless steel internals, and are equipped with Teflon / Buna-N / Teflon diaphragm assembly.
-
ITT ConoflowITT Conoflow GH40VT 316 Stainless Steel Vacuum Service Regulator
The ITT Conoflow GH40VT 316 Stainless Steel Vacuum Regulator is used to provide a regulated vacuum by accurately regulating the sub-atmospheric pressure of a vessel being evacuated. This series of vacuum service regulators is especially suited for laboratory work, and test stands for simulation of high altitude conditions.
-
ITT ConoflowITT Conoflow GH40VT Brass Vacuum Service Regulator
The ITT Conoflow GH40VT Brass Vacuum Regulator is used to provide a regulated vacuum by accurately regulating the sub-atmospheric pressure of a vessel being evacuated. This series of vacuum service regulators is especially suited for laboratory work, and test stands for simulation of high altitude conditions.
-
ITT ConoflowITT Conoflow GVB11, GVB12 Snap-Acting Relays
The ITT Conoflow GVB11 and GVB12 Snap-Acting Relays are lightweight, compact, and are easily piped and mounted. These snap-acting relays change ports to switch or lock in secondary air source when the main supply pressure fails below a predetermined set point. In the event of supply or pilot pressure failure, the positive action relay with one common, and two inlet or outlet ports will automatically switch from main to auxiliary supply pressure, lock an actuator in its last position, extend or retract an actuator stem, and divert flow or pressure from one device to another. The GVB11 and GVB12 snap-acting relays have an integral pilot which eliminates the extra piping, and connections required with other lock-up valves.
-
ITT ConoflowITT Conoflow HP500 High Pressure Reducing Regulator, High Purity Diaphragm Type
The ITT Conoflow HP500 High Pressure Reducing Regulator is a self-contained, diaphragm sensing high purity regulator. A broad offering of construction materials, and five control pressure ranges allow for applications that include regulating specialty gasses, gas chromatography, research labos, and the regulation of corrosive and noncorrosive gasses and liquids. This high purity pressure regulator is designed to accurately control pressure ranges of 4-25 psig, 4-50 psig, 5-100 psig, 6-250 psig, and 10-500 psig (0-0.173 MPa, 0-0.345 MPa, 0-0.690 MPa, 0-1.73 MPa, and 0-3.45 MPa). The HP500 has 1/4″ NPT inlet and outlet connections. Gauge ports are optional. To suit high purity applications, Vacuseal, VCR, and Ultra Seal welded fittings are available. Adjustments within each range are made with a standard large handwheel. A wrench style knob with a locking device, and a T bar handle are optional.
-
Pressure RegulatorsSensus 046, 046C, 046-2 Field Regulators, High Pressure Gas Regulators
The Sensus 046 field and high pressure gas regulator combines simple design, and rugged construction for exceptional performance, and operational safety. This field regulator features a dependable, flexible, and economical solution for pound-to-pound pressure regulation applications. The 046 model high pressure gas regulator is easy to install, adjust, inspect, and service in all piping arrangements. Although the regulators are used commonly for natural gas service, they perform equally well with nitrogen, air, dry CO2, and other inert gases. Typical applications for the model 046 include farm taps, field regulator applications, high-pressure industrial air or gases and gas blanketing systems. The standard models 046 and 046C are non-relief type regulators, and the model 046-2 has relief protection to prevent damage to internal parts and the downstream system.
-
Pressure RegulatorsSensus 143-80-1, 143-80-2, 143-80-6, 143-80-2HP Domestic Service Gas Pressure Regulators
The Sensus domestic 143-80 service regulator features precise pressure control with outstanding performance, and dependability. Although this pressure regulator is mainly used with natural gas, the regulator performs equally well when with air, LPG, dry CO2, propane, and other non-corrosive gases. The 143-80 domestic gas service regulator is commonly found in residential applications, but is regularly used in small commercial and industrial applications including burners, furnaces, ovens, heaters, and gas engines. This model is rugged, compact, and can be installed in virtually any position. The Sensus model 143-80-1 is a standard service regulator, the model 143-80-2 service regulator includes an internal relief valve (IRV), and the model 143-80-6 service regulator offers low pressure cutoff (LPCO).
-
RegulatorsTrerice 91000, 91400, 91600 Self-Operated Temperature Regulator
The Trerice 91000, 91400, and 91600 self-operating temperature regulators do not require an external power source, and are preferred by original equipment manufacturers (OEMs), mechanical contractors, and specifying engineers. The actuator has a rugged die-cast aluminum housing, fully enclosed bellows assembly, and internal over range protection. The valve bodies for the 91000, 91400, and 91600 models are offered in single-seated, double-seated, and three-way designs. The 91000, without idicating actuator dial, features a lower profile for applications with space constraints. The 91400, with indicating actuator dial, allows the operator to verify the process temperature. The 91600, with fail-safe actuator, causes valve to fail in the safe control position should accidental damage to the thermal system occur.
-
RegulatorsTrerice 91000XT Self-Operated Tank Thermostat Temperature Regulator, OTTR (Oil Treater Temperature Regulator)
The Trerice 91000XT tank thermostat is a temperature regulator specifically designed to control the temperature of oil field heaters, OTTRs (oil treater temperature regulators), and separators. It is entirely self-contained, requires no external power source, and is the most widely preferred unit of its kind. When installed in a treater, the normally open valve will automatically close off the flow of gas as temperature increases, thereby regulating temperature within the treater. The 91000XT is ruggedly constructed with a heavy duty, die cast aluminum actuator housing and fully enclosed bellows assembly. Its single seated, cast-iron valve body is fitted with a stainless steel plug assembly and soft seating Viton o-ring to provide tight shut-off.
-
Pressure RegulatorsVictor Meco 0799-2064 Type B Series Brass Economy Compact Single Stage Industrial Cylinder Regulator
The Victor Meco 0799-2064 type B series rugged economy single stage industrial cylinder regulators have a compact intermediate size for mid-range pressures and flows with maximum inlet pressures of up to 3,000 psi to outlet working pressures of 160 psi. The 0799-2064 B series regulator has a forged brass body and bonnet with an Allen style adjustable screw, and Neoprene seat material.
-
Pressure RegulatorsVictor Meco 4000-5076 Type SGL620 Series NACE MR01-75 Chem Master Stainless Steel High Purity Pressure Regulator
The Victor Meco 4000-5076 type SGL620 pressure regulator is constructed of 316 stainless steel barstock, and is intended for primary pressure gas control for very high purity, corrosive, and toxic gas applications in pipeline gas distribution systems requiring a purity grade of up to 6.0. The SGL620 400-5076 model pressure regulator is supplied with an Allen style adjustable screw, a PCTFE seat, and carries an inlet pressure rating of 4,350 psi with a maximum outlet pressure of 300 psi.
-
Pressure RegulatorsVictor Meco 5641-8461 Type P Series Brass Single Stage Industrial Cylinder High Pressure Regulator
The Victor® Meco® 5641-8461 type P series single stage industrial cylinder pressure regulator for specialty gas reduces high inlet pressures of up to 5,500 psi to outlet working pressures of 125 psi. The type P series 5641-8461 pressure regulator has a forged brass body and bonnet with a Allen style adjustable screw, and Nylon seat material. This high pressure regulator model is used in heavy-duty industrial, oil and gas applications.
-
Pressure RegulatorsVictor Meco 5641-8464 Type P Series Brass Single Stage Industrial Cylinder High Pressure Regulator
The Victor® Meco® 5641-8464 type P series single stage industrial cylinder pressure regulator for specialty gas reduces high inlet pressures of up to 5,500 psi to outlet working pressures of 150 psi. The type P series 5641-8464 pressure regulator has a forged brass body and bonnet with a Tee style adjustable screw, and Nylon seat material. This high pressure regulator model is used in heavy-duty industrial, oil and gas applications.
-
Pressure RegulatorsVictor Meco 5641-8465 Type P Series Brass Single Stage Industrial Cylinder High Pressure Regulator
The Victor® Meco® 5641-8465 type P series single stage industrial cylinder pressure regulator for specialty gas reduces high inlet pressures of up to 5,500 psi to outlet working pressures of 150 psi. The type P series 5641-8465 pressure regulator has a forged brass body and bonnet with a Allen style adjustable screw, and Nylon seat material. This high pressure regulator model is used in heavy-duty industrial, oil and gas applications.
-
Pressure RegulatorsVictor Meco 5641-8468 Type P Series Brass Single Stage Industrial Cylinder High Pressure Regulator
The Victor® Meco® 5641-8468 type P series single stage industrial cylinder pressure regulator for specialty gas reduces high inlet pressures of up to 5,500 psi to outlet working pressures of 225 psi. The type P series 5641-8468 pressure regulator has a forged brass body and bonnet with a Tee style adjustable screw, and Nylon seat material. This high pressure regulator model is used in heavy-duty industrial, oil and gas applications.
-
Pressure RegulatorsVictor Meco 5641-8470 Type P Series Brass Single Stage Industrial Cylinder High Pressure Regulator
The Victor® Meco® 5641-8470 type P series single stage industrial cylinder pressure regulator for specialty gas reduces high inlet pressures of up to 6,000 psi to outlet working pressures of 225 psi. The type P series 5641-8470 pressure regulator has a forged brass body and bonnet with a Tee style adjustable screw, and Nylon seat material. This high pressure regulator model is used in heavy-duty industrial, oil and gas applications.
-
Pressure RegulatorsVictor Meco 5645-8371 Type P600 Series Brass Single Stage Industrial Cylinder High Outlet Pressure Regulator
The Victor® Meco® 5645-8371 type P600 series single stage industrial cylinder pressure regulators for specialty gas reduces high inlet pressures of up to 5,500 psi to high outlet working pressures to 550 psi. The type P600 series 5645-8371 has a forged brass body and bonnet with a Tee style adjustable screw, and Nylon seat material. This model of pressure regulator is used in industrial applications requiring high outlet pressures.