Product Specs
Performance Rating
20-100: 125 psig at 350°F, 300 psig at 100°F
20-200: 200 psig at 400°F, 400 psig at 100°F
20-300: 200 psig at 400°F, 400 psig at 100°F
Options & Sizes
1/4″ Drain Valve Standard
3/8″, 1/2″, 3/4″ (20-200, 20-300 Only)
Coated Steel Guard Rods included
Body Material
ASTM B16 Brass (20-300 Only)
ASTM B584 C84400 Bronze
ASTM B584 C89836 Bronze (20-100 LF Only)
Stem Material
ASTM B16 Brass
Apollo Valves 20-100, 20-200, 20-300 Series Bronze Liquid Level Gauges, Water Gauges
Apollo, Level Gauges, Liquid Level Instruments
Apollo Valves 20-100, 20-200, 20-300 Series Bronze Liquid Level Gauges, Water Gauges
The Apollo® 20 Series Bronze Liquid Level Gauges, or water gauges, meet ASME design requirements, and are for use on all types of liquid level verification. These liquid level gauge sets are available in many variations including heavy bronze body patterns for higher service ratings, and with aluminum or plastic composite handles. An Apollo® standard liquid level gauge set includes top and bottom valves, sight glass, coated steel guard rods, and a 1/4″ drain valve. The Apollo® 20-100 series fits pipe sizes 3/8″ or 1/2″, the 20-200 series fits pipe sizes 3/8″ through 3/4″, and the 20-300 series is available in 1/2″ or 3/4″ pipe sizes. Made in the USA.
Related products
-
JergusonJerguson Series 20 Liquid Level Gages, Reflex R-20 and Transparent T-20, Armored Flat Glass Gages
The Jerguson Series 20 liquid level gage is the most commonly produced covering 80-85% of the applications encountered. The Series 20 armored glass gage features a recessed gasket surface, and shrouded covers. A recessed gasket surface provides positive location of the seal gasket during both assembly and field repair. This makes it possible to repair the gage while mounted to the vessel. The recessed gasket surface contains the gasket to prevent lateral movement which could lead to a gasket blow-out (as with competitive gages). All Jerguson armored glass gages are hydrostatically tested at 1 1/2 times the design pressure rating at 100°F (38°C) prior to shipment.
-
JergusonJerguson Series L10 Large Chamber Liquid Level Gages for Boiling / Flashing Liquids, Reflex and Transparent Armored Flat Glass Gages
The Jerguson Series L10 large chamber liquid level gages are designed to give an accurate liquid level reading of liquids that have a tendency to surge or boil. These armored glass gages are highly effective in reducing the boiling effects of entrained gas being released under low pressure. They are effective at eliminating level fluctuations that occur in standard gages with small chambers when boiling / flashing vapors try to rise to the surface. Jerguson Series L 10 large chamber armored glass gages are available in reflex or transparent design. The liquid chamber is constructed of heavy tubing, carefully slotted, and machined to provide plane seats for the gaskets and glass assemblies. Covers are steel secured with specially designed steel bolts.
-
JergusonJerguson Series 300L Liquid Level Gages, Reflex R-300L and Transparent T-300L, Armored Flat Glass Gages, ANSI 300
The Jerguson Series 300L liquid level gages are lower cost with increased visible ranges. The series 300L provides a more visible range per gage section at an economical price. This glass gage series uses the proprietary Jerguson 25mm glass, which is thinner, narrower, and longer than traditional gage glass. The Series 300L features a recessed gasket surface, bar-stock non-shrouded covers, and ASTM grade bolting. Due to the length of each gage section this model is not recommended for high pressure steam service. All Jerguson armored flat glass gages are hydrostatically tested prior to shipment at 1 1/2 times the design pressure rating at 100°F (38°C).
-
JergusonJerguson Magnicator Flashproof Magnetic Flag Liquid Level Indicators for Boiling Fluids or Flashing Vapors
The Jerguson FlashProof™ Magnicator design addresses problems that may occur with standard level indicators: boiling fluids, flashing vapors, and problems caused by dirty or viscous services. This design provides an accurate float level and indicator reading, and allows the gage to be flushed without removing the float from the column.