Product Specs
Accuracy
±1.0% of reading from 1.5 to 40 ft/sec (0.5 to 12.0 m/sec) and ±0.015 ft/sec (±0.0046 m/sec) for velocity below 1.5 ft/sec (0.46 m/sec)
Repeatability
±0.25%
Flow Measuring Range
±0.07-40 ft/sec (±0.02-12 m/sec)
Operating Temperature Range
Electronics:-5°F to 140°F (-20 to 60°C)
Transducer:-40°F to 300°F (-40 to 150°C)
Pipe Diameter
SE16A: 0.5″ -1.5″ (15 mm -40 mm)
SE16B: 2″ -10″ (50 mm -250 mm)
SE16C: 12″ -48″ (300 mm -1200 mm)
Materials
Brass
Carbon Steel
Stainless Steel
Aluminum
Cast Iron
Concrete Lined Ductile Iron
Copper
Ductile Iron
Fiberglass
HDPE
Pipes with bonded liners including Epoxy, Rubber, and PTE
PVC
PVDF
Operating Frequency
SE16A: 2.56 MHz
SE16B: 1.28 MHz
SE16C: 640 kHz
Power Input
100-240 VAC / 50-60 Hz, 10 VA max
Optional: 9 -32 VDC, 10 Watts max
Analog Output
1,000 ohm load max
Isolated 4-20mA/0-5V
Programmable Offset
Control Relays
2 Relays: form C dry contacts rated 5 amp SPDT; programmable flow alarm and/or flow proportional pulse
Optional: 4 additional (6 total), rated 5 amp SPDT
AW-Lake Clamp-On Ultrasonic Transit Time Flow Meter
AW-Lake Clamp-On Ultrasonic Transit Time Flow Meter
The AW-Lake Clamp-On Ultrasonic Transit Time Flow Meter fastens on the outside of vertical or horizontal pipes ranging in size from ½” through 48”. Housed in a water-and dust-tight NEMA4X polycarbonate enclosure, the Clamp-On Ultrasonic Flow Meters are compatible with a range of metal and plastic pipe materials and corrosive liquids that would damage standard flow meters. As a result, the non-intrusive, clamp-on ultrasonic sensors feature enhanced flow measurement with no pressure drop in a range of applications such as food or chemical processing plants, oil refineries, and more.
Related products
-
AW-LakeAW-Lake Basic Inline Liquid Variable Area Flow Meter
The AW-Lake Basic Inline Liquid Variable Area Flow Meter is ideal for monitoring pump performance and oil or water flows through hydraulic circuits and cooling systems. Often referred to as rotameters, AW-Lake’s Basic variable area flow meters are a low cost alternative to other flow meter types and are available in numerous materials of construction, including aluminum, brass and stainless steel to meet system and media requirements. The superior design of this inline flow meter makes it not only weather-proof for outdoor environments and wash-downs, but also reliable with maintenance-free performance.
-
AW-LakeAW-Lake FlowStat Turbine Flow Sensor, Paddle Wheel Flow Meters
The AW-Lake FlowStat Paddle Wheel Flow Meters are used to monitor various fluids. This turbine flow rate sensor can be connected directly to analog acquisition cards, chart recorders or other monitoring instruments without external signal conditioning. The FlowStat flow rate meter integrates rugged tangential turbine technology with a precision digital to analog conversion circuit hermetically encapsulated within the body of the meter.
-
DwyerDwyer Series RM Rate-Master Polycarbonate Flowmeters
The Dwyer Series RM Rate-Master Flowmeters are a line of general use, direct reading precision flowmeters suitable for both gas and liquid applications. The RM Rate-Master® Polycarbonate Variable Area Flowmeter Series consists of 2″, 5″ and 10″ scales that can be panel or surface mounted with optional precision metering valves. The Rate-Master flowmeter bodies can be instantly interchanged within the same series scale size, allowing the piping to remain undisturbed, interchangeability of the ranges, and easy cleaning.
The Dwyer Series RM Rate-Master® Polycarbonate Flowmeters are available with optional adjustable pointer flags which provide a quick visual reference to a required flow level. Made of clear plastic, the pointer flags snap into place inside the bezel and slide to the desired level. The RM Rate-Master Polycarbonate Flowmeters are also available with an optional NIST traceable calibration certificate.
-
Flow Meters IndicatorsJacoby-Tarbox High Pressure Flanged Bulls-Eye Sight Flow Indicators, ASME Class 300, 600, 900 & 1500
The Jacoby-Tarbox line of ASME rated high pressure flanged bulls-eye sight flow indicators are engineered per the design criteria of ASME B31.1 & B31.3, Power and Process Piping Codes, incorporating the listed ASTM materials for all metals in the unit construction.
Pipeline view is maximized, in most cases with a diameter that is equal to the nominal pipe size, allowing 100% unobstructed process observation of gases, solids, solutions, and slurries.
Non-Rotor models offer minimized pressure drops with their non-restricting, smooth, full-bore construction.
acoby-Tarbox ASME flanged units are ideal for piping, process, and mechanical engineers that wish to maintain full ASME compliance within their pipelines. Refining, chemical, power, and pharmaceutical industries are just a few areas of Jacoby-Tarbox’s successful code applications. O.E.M.’s specify this series when maximum reliability in harsh operating service is desired.