Product Specs
Input Voltages
120VAC/DC
24VAC/DC
Input Frequency
50 / 60 Hz or DC
Input Tolerance (Voltage)
± 15% of nominal
Power Consumption
4VA Max
Output Type
Electromechanical relay
Output Rating
5A @ 240VAC Max
Timing Types
On delay
Repeat Accuracy
± 0.5 % of setting or 0.004 secs, whichever is greater
Reset Time
40 msec minimum
Indication
LED -ON when timing
Timing Ratio
10 to 1 potentiometer
Time Range
8 per unit
Range Tolerance
±10% typical
Control
AC proximity sensor
Power actuated
Control Terminals
2-10 (11 pin unit)
2-7 (8 pin unit)
Operating Temp
-20°C to 70°C (-4°F to 158°F)
Timing Variation vs Temp
± 5% maximum
Mounting
Plug-in
Termination
11 pin socket
8 pin socket
Housing
Plastic
ISSC-Kanson Electronics Model 1071 Plug-in Industrial Solid State Timer
Counters/Timers, Electrical Solutions, ISSC Kanson
ISSC-Kanson Electronics Model 1071 Plug-in Industrial Solid State Timer
The ISSC-Kanson Electronics Model 1071 plug-in industrial solid state timer is a multi-range unit which is programmable for 8 different time ranges. The 1071 reduces inventory requirements by offering the time range capacity of eight separate timers in one unit. Input Power Actuates timing sequence, eliminating the need for a separate control circuit. Removing power automatically resets timing sequence. Input Is Compatible with both standard mechanical switches and solid state proximity sensors.
Related products
-
Electrical SolutionsSolarcraft DC UPS 100W and 200W Uninterruptible Power Supply for Critical DC Loads
Solarcraft DC-UPS 100W and 200W Uninterrupted Power Supply is both a battery charger and a primary power supply, designed to power your load while keeping batteries charged. This combination produces clean uninterrupted DC power for critical loads.
In the event of utility power interruption, the Solarcraft DC-UPS supplies back-up power for hours, days or even weeks depending on the load and battery capacity.
The Solarcraft DC-UPS is available in three sizes: 100W for 12V, 100W for 24V, and 200W for 24V applications.
-
Electrical SolutionsTripp•Lite by Eaton 750VA / 450W Standby UPS, Desktop / Wall Mount, Single Phase, Uninterruptible Power Supply
The Tripp•Lite by Eaton is a compact desktop UPS with silent alarm that provides battery backup support for the home/office network system or digital signage components.
The 12-outlet 120V battery backup is ideal protection for your home office, media center or commerce components.
Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout.
The space-saving ABS housing fits on a desktop, shelf or anywhere else convenient to your workstation or home theater, with keyhole mounting tabs on the rear allowing for easy wall-mount installation.
-
Electrical SolutionsElectroswitch Series 24 Smart Rotary Control Switch with Lighted Nameplate
The Electroswitch Series 24 Lighted Smart Rotary Control Switch with Lighted Nameplate provides local and remote SCADA annunciation of breaker trip coil failure. This series of control switches can be manually and remotely operated, are easy to use, require no special operator training, an can be wired to indicate any desired event. The Series 24 lighted nameplates are available with one, two, or three replaceable LEDs. These lighted nameplates can be used on all Series 24 Switches saving panel space, and reducing purchase and installation costs.
-
Electrical SolutionsElectroswitch Series 24 CSR/SD, SCADA Disable Control Switch Relay
The Electroswitch Series 24 CSR/SD, Control Switch Relay with SCADA Disable, operates like a standard CSR, allowing both SCADA and manual operation. Pushing in the handle disables remote operation leaving only Local/Manual operation possible. This action allows testing, and service to be performed safely. In addition, electrical connections (15 amp, 600 volt) are provided for the 2 N/C and N/O contacts at the terminal block deck located at the rear of the CSR/SD. These can be used to provide customer status indication.