Product Specs
Input Voltages
20 -250 VAC/DC
Input Frequency
50 / 60 Hz or DC
Input Leakage
≤ 2mA
Transient Protection
MOV
Output Max Load Current
500 mA (continuous)
Output Voltage
≤ 9 Volts (with resistive load max load current)
Max Inrush Current
7:00:00 AM
Min Load Current
5 mA
Sensing Distance
12.7mm (0.5 in)
Sensing Target Size
40mm x 40mm mild steel
Timing Speed Ranges
A: 5-75 ppm
B: 50-750 ppm
C: 500-7500 ppm
Timing Max Speed
10,000 ppm
Timing Hysteresis
10% differential between pickup & dropout speeds
Timing Response Time
All speed ranges 3 msec / 3 msec (target present / target absent)
Timing Delay In
100 msec (with start up delay at zero)
Start Up Time Delay
0-20 seconds (user adjustable)
Operating Temp
-25˚C to 70˚C (-13°F to 158°F)
Termination
3 pin mini-style connector
Housing
Fire-retardant ABS/polycarbonate blend
Environmental
IP67
NEMA 1
NEMA 12
NEMA 13
NEMA 3
NEMA 4
NEMA 6
ISSC-Kanson Electronics Model 1248A Limit Style, Industrial Solid State Proximity Sensor / Speed Switch, Motion Detector
ISSC-Kanson Electronics Model 1248A Limit Style, Industrial Solid State Proximity Sensor / Speed Switch, Motion Detector
The ISSC-Kanson Electronics Model 1071 plug-in industrial solid state timer is a multi-range unit which is programmable for 8 different time ranges. The 1071 reduces inventory requirements by offering the time range capacity of eight separate timers in one unit. Input Power Actuates timing sequence, eliminating the need for a separate control circuit. Removing power automatically resets timing sequence. Input Is Compatible with both standard mechanical switches and solid state proximity sensors.
Related products
-
Counters/TimersISSC-Kanson Electronics Model 1071 Plug-in Industrial Solid State Timer
The ISSC-Kanson Electronics Model 1071 plug-in industrial solid state timer is a multi-range unit which is programmable for 8 different time ranges. The 1071 reduces inventory requirements by offering the time range capacity of eight separate timers in one unit. Input Power Actuates timing sequence, eliminating the need for a separate control circuit. Removing power automatically resets timing sequence. Input Is Compatible with both standard mechanical switches and solid state proximity sensors.
-
Electrical SolutionsSolarcraft Custom Solar Power Solutions for Field Electronics in Remote Areas
Solarcraft custom solar power is a reliable, low maintenance power solution for field electronic applications in remote areas. Solar power provides uninterruptible power for critical electronics where utility power is unavailable or where the cost or complication of installing utility cables is prohibitive.
Solar power systems are sized and configured for the specific application, with loads ranging from 40W to 5,000W.
Solarcraft’s accurate system sizing ensures optimal year-round performance. When sized correctly, the solar power system and battery bank will operate for many years, requiring only annual battery check-ups.
-
Electrical SolutionsElectroswitch Series 24 3-Phase TCM, Trip Coil Monitor
The Electroswitch Series 24 Three-Phase TCM, Trip Coil Monitor, provides continuous monitoring of each phase of a Breaker Trip Coil. The TCM is a convenient panel-mounted relay that provides continuous monitoring of trip coils, and 52B auxiliary contacts utilizing 3 bi-color LEDs for visual indication of trip coil and breaker position status for each phase. The Series 24 TCM monitors the individual phases from each trip coil power supply, thereby meeting the Northeast Power Coordinating Council’s requirements for the monitoring of a single-pole tripping to ensure proper breaker operation should there be a single trip coil failure.
-
Electrical SolutionsElectroswitch Series 24 CSR/SD, SCADA Disable Control Switch Relay
The Electroswitch Series 24 CSR/SD, Control Switch Relay with SCADA Disable, operates like a standard CSR, allowing both SCADA and manual operation. Pushing in the handle disables remote operation leaving only Local/Manual operation possible. This action allows testing, and service to be performed safely. In addition, electrical connections (15 amp, 600 volt) are provided for the 2 N/C and N/O contacts at the terminal block deck located at the rear of the CSR/SD. These can be used to provide customer status indication.