Product Specs
Input Voltages
18 -72 VAC/DC
80 to 160 VAC / 45 to 155 VDC
90 to 300VAC / 120 to 320 VDC
Transient Protection
TVS
Power Consumption
6W Max
Output Type
Electromechanical relay
Output Rating
0.3A @ 300 VDC
0.4A @ 150 VDC
0.5A @ 100 VDC
10A @ 250 VAC (Max)
10A @ 28 VDC (Max)
3A @ 37 VDC
Timing Types
Control On-Delay
Repeat Accuracy
± 1 % of setting
Reset Time
0.1 sec minimum
Indication
LED “on” when timing is complete
Range Tolerance
≤ 10%
Energize Delay
20 ms
Control Signal Pulse Length
25 ms min
Operating Temp
-30°C to +73.9°C (-22° to 165°F)
Timing Variation vs Temp
± 10% maximum
Mounting
Din-Rail 35mm
Termination
Finger-safe connectors
Housing
Plastic
Polycarbonate
Environmental
IP20
Max Wire Size
12 AWG
Min Wire Size
26 AWG
Connection Method
Screw connecction with tension sleeve
Wire Termination
12 AWG (using wire pin terminals)
Ferrules (for wire 14 AWG to 26 AWG)
Accessories
Din Clip (Double Housing)
Din Clip (Single Housing)
Orange Terminal Block
Panel Mount Reset Pushbutton
Potentiometer Knob
ISSC Kanson Electronics Model 1310 Din Rail Mount Industrial Solid State On Delay Timer
ISSC Kanson Electronics Model 1310 Din Rail Mount Industrial Solid State On Delay Timer
The ISSC Kanson Electronics Model 1310 is a control-on delay timer, built specifically for continuous duty operation.
The 1310 control-on delay timer is for electric utility applications capable of high voltage DC switching.
The 1310 industrial solid state on delay timer comes with Din-Rail mounted housing with finger-safe electrical connectors (IP20 rating), reinforced isolation for relays (sealed relays), and timed and instantaneous contacts.
Upon application of input voltage into the ISSC Kanson 1310 control-on delay timer, the time delay relay is ready to accept a control signal. When the control is applied, the time delay begins. At the end of the time delay, the output is energized and remains in that condition as long as either the control is applied or the input voltage remains. If the control is removed during the time delay, the output remains de-energized and the time delay is reset.
Related products
-
EatonEaton 9PX 6 kVA Lithium-ion UPS, Single Phase/Double Conversion Uninterruptible Power Supply
The Eaton 9PX Lithium-ion Uninterruptible Power Supply (UPS) features a 6 kVA power rating, remote firmware upgrades, and comes in rackmount or tower for factors. This model has the same reliable features as the lead-acid UPS, including load segments that allow for prioritized shutdown, remote power on (RPO), remote on / off (ROO) and output relay ports that increase control capabilities.
-
Counters/TimersISSC-Kanson Electronics Model 1071 Plug-in Industrial Solid State Timer
The ISSC-Kanson Electronics Model 1071 plug-in industrial solid state timer is a multi-range unit which is programmable for 8 different time ranges. The 1071 reduces inventory requirements by offering the time range capacity of eight separate timers in one unit. Input Power Actuates timing sequence, eliminating the need for a separate control circuit. Removing power automatically resets timing sequence. Input Is Compatible with both standard mechanical switches and solid state proximity sensors.
-
EatonEaton 5S UPS, 120V, 230V, 50 / 60 Hz Desktop / Tower Uninterruptible Power Supply
The Eaton 5S Uninterruptible Power Supply (UPS) displays critical UPS information on battery time and outage tracking through an available, user-friendly LCD interface.
The Eaton 5S desktop UPS also provides surge protection for your network data line and coax cable connection.
The versatile 5S UPS can be used as a tower or as a desktop monitor stand, and comes with a standard three-year warranty on the UPS and batteries along with a $150,000 load protection guarantee for all of your connected equipment.
-
EatonEaton 9PXM UPS 4-20kVA
The Eaton 9PXM Uninterruptible Power Supply (UPS) is a scalable, modular UPS that combines the highest levels of reliability and the lowest total cost of ownership. Eaton’s 9PXM enables you to build a mission critical power solution specific to your needs. Its patented design allows you to add capacity or redundancy, and increase runtime as your power needs change. The plug-and-play power and battery modules are lightweight and user replaceable so you can add them as needed without a service call or having to put a redundant system in bypass. The 9PXM’s 20kVA N+1 capacity, small footprint and easy rack conversion make it an ideal solution for an array of data center, mission critical, and retail applications. The design offers harmonious compatibility with 4-post or high density racks, PDU’s and network gear for seamless integration into existing IT infrastructure.