Related products

• 
  ITT Conoflow

  ITT Conoflow GH20 Brass Service Pressure Reducing Regulator

  The ITT Conoflow GH20 Service Pressure Reducing Regulator is a rugged unit with flow capacities, and performance characteristics which allow it to operate in both instrument, and industrial applications. This GH20 model has a brass bonnet.

• 
  ITT Conoflow

  ITT Conoflow GH40 Brass Service Pressure Reducing Regulator with Aluminum Bonnet

  The ITT Conoflow GH40 Service Pressure Reducing Regulator is for applications where positive shutoff, and minimum air consumption are required. These rugged pressure regulators have flow capacities, and performance characteristics which allow them to operate in both instrument, and industrial applications. This model service pressure reducing regulator has an aluminum bonnet, a Buna-N diaphragm assembly, and regulated output pressure ranges of 0-25 psi, 60 psi, and 125 psi (0-172 kPa, 414 kPa, and 862 kPa).

• 
  ITT Conoflow

  ITT Conoflow GVB11, GVB12 Snap-Acting Relays

  The ITT Conoflow GVB11 and GVB12 Snap-Acting Relays are lightweight, compact, and are easily piped and mounted. These snap-acting relays change ports to switch or lock in secondary air source when the main supply pressure fails below a predetermined set point. In the event of supply or pilot pressure failure, the positive action relay with one common, and two inlet or outlet ports will automatically switch from main to auxiliary supply pressure, lock an actuator in its last position, extend or retract an actuator stem, and divert flow or pressure from one device to another. The GVB11 and GVB12 snap-acting relays have an integral pilot which eliminates the extra piping, and connections required with other lock-up valves.

• 
  ITT Conoflow

  ITT Conoflow GH21XT Fixed, Constant, Differential Pressure Regulator

  The ITT Conoflow GH21XT Fixed Differential Pressure Regulator is used to maintain a constant pressure differential across a variable or fixed orfice, providing a constant, or fixed, flow rate regardless of variations in upstream or downstream pressure. Various configurations of this differential pressure regulator are available based on the needs of the application. The GH21XT maintains a fixed differential of approximately 3 psi (21 kPa) across the bonnet, and outlet connection. Adjustment of the flow rate is made downstream of the system. This model constant differential pressure regulator is normally used with a flow rate indicator having a built-in needle valve.