Product Specs
Connections
1/4″ NPT
Regulated Ranges
0-3 psi (0-21 kPa)
125 psi (862kPa)
15 psi (103 kPa)
25 psi (172 kPa)
35 psi (241 kPa)
5 psi (35 kPa)
50 psi (345 kPa)
Sensitivity
0.05″ psi (0.345 kPa)
Ambient Temperature Range
-20¼F to +150¼F (-29¼C to +66¼C)
Body Material
316 Stainless Steel
Brass
Bonnet Material
Aluminum
Diaphragm Assembly
Buna “N”
Buna “N” Teflon Faced Process Side Only
Nozzle Assembly
302/303 Stainless Steel
316 Stainless Steel
Brass (Body), Stainless Steel (Plug)
Range Spring
Steel Plated
ITT Conoflow GH30 Back Pressure Regulator
ITT Conoflow, Pressure Regulators, Regulators
ITT Conoflow GH30 Back Pressure Regulator
The ITT Conoflow GH30 Back Pressure Regulator is used to maintain a constant upstream pressure of gas, vapor or liquid. Designed for accurate regulation under low flow conditions, this model back pressure regulator is widely used for protection of analysis instrumentation, or as a relief valve in supply pressure lines to control devices. The GH30 back pressure regulator is available in a brass and aluminum combination, or all stainless steel construction. This model has a Buna-N diaphragm assembly as standard, and a Teflon / Buna-N / Teflon diaphragm assembly is used in the stainless steel models for corrosive services. Regulated pressure ranges for this back pressure regulator are 0-3 psi, 5 psi, 15 psi, 25 psi, 35 psi, 50 psi, and 125 psi (0-21 kPa, 35 kPa, 103 kPa, 241 kPa, 345 kPa, and 862 kPa).
Related products
-
ITT ConoflowITT Conoflow GH40 Brass Service Pressure Reducing Regulator
The ITT Conoflow GH40 Service Pressure Reducing Regulator is for applications where positive shutoff, and minimum air consumption are required. These rugged pressure regulators have flow capacities, and performance characteristics which allow them to operate in both instrument, and industrial applications. This model service pressure reducing regulator has a Buna-N diaphragm assembly, and regulated output pressure ranges of 0-25 psi, 60 psi, and 125 psi (0-172 kPa, 414 kPa, and 862 kPa).
-
ITT ConoflowITT Conoflow GH10 Brass Manual Loading Regulator with Aluminum Bonnet
The ITT Conoflow GH10 Manual Loading Regulator is a precision unit designed for use in laboratory environments, remote loading of pneumatic devices, speed changers, and other general purpose applications. This GH10 model has an aluminum bonnet.
-
ITT ConoflowITT Conoflow GH20VT 316 Stainless Steel Vacuum Service Regulator
The ITT Conoflow GH20VT 316 Stainless Steel Vacuum Regulator is used to provide a regulated vacuum by accurately regulating the sub-atmospheric pressure of a vessel being evacuated. This series of vacuum service regulators is especially suited for laboratory work, and test stands for simulation of high altitude conditions.
-
ITT ConoflowITT Conoflow GFH45 Airpak Filter-Regulator, Brass Low Pressure Regulator
The ITT Conoflow GFH45 Series Airpak® Filter-Regulator is used to provide clean, accurate air to instruments, valves, positioners, transducers, and other pneumatic control devices. The design provides high flow capability, durable materials of construction and bubble-tight shutoff. The GFH45 low pressure regulator has a maximum supply pressure capability of 300 psig (2.07 MPa) with control output settings of 0-25 psig, 0-60 psig, and 0-125 psig (0-172 kPa, 0-414 kPa, and 0-862 kPa). This brass filter-regulator boasts a high flow delivery rate and excellent droop characteristic. Th GFH45 regulator is offered with 1/4″ NPT inlet and outlet ports, two outlet gauge ports, and brass construction.
The ITT Conoflow GFH45 Series Airpak® Filter-Regulator is used to provide clean, accurate air to instruments, valves, positioners, transducers, and other pneumatic control devices. The design provides high flow capability, durable materials of construction and bubble-tight shutoff. The GFH45 low pressure regulator has a maximum supply pressure capability of 300 psig (2.07 MPa) with control output settings of 0-25 psig, 0-60 psig, and 0-125 psig (0-172 kPa, 0-414 kPa, and 0-862 kPa). This brass filter-regulator boasts a high flow delivery rate and excellent droop characteristic. Th GFH45 regulator is offered with 1/4″ NPT inlet and outlet ports, two outlet gauge ports, and brass construction.