Product Specs
Body Material
Carbon Steel
Stainless Steel
Temperature Range
100°F (38°C) to 800° (427°C)
Pressure Ranges
Reflex: 1,250 psi (86.2 barg) -3,270 psi (225.5 barg)
Transparent: 350 psi (24.1 barg) -2,000 psi (137.9 barg)
Gage Connection
End
Glass Material
Aluminosilicate
Borosilicate
HP Borosilicate
Jerguson Series 20 Liquid Level Gages, Reflex R-20 and Transparent T-20, Armored Flat Glass Gages
Jerguson, Level Gauges, Liquid Level Instruments
Jerguson Series 20 Liquid Level Gages, Reflex R-20 and Transparent T-20, Armored Flat Glass Gages
The Jerguson Series 20 liquid level gage is the most commonly produced covering 80-85% of the applications encountered. The Series 20 armored glass gage features a recessed gasket surface, and shrouded covers. A recessed gasket surface provides positive location of the seal gasket during both assembly and field repair. This makes it possible to repair the gage while mounted to the vessel. The recessed gasket surface contains the gasket to prevent lateral movement which could lead to a gasket blow-out (as with competitive gages). All Jerguson armored glass gages are hydrostatically tested at 1 1/2 times the design pressure rating at 100°F (38°C) prior to shipment.
Related products
-
Liquid Level InstrumentsWhitman Controls L20 Series Side Mounted Stainless Steel Liquid Level Switch
The Whitman Controls L20 Series Side Mounted 316L Stainless Steel Liquid Level Switches are commonly used in potable water, hot water, various acids, and in solvents. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and stainless steel body provides use up to 500 psi. These are most often used in many OEM and various other custom industrial applications. These are available with several options as specified by the user.
-
Liquid Level InstrumentsWhitman Controls L40 / L45 Series Vertical Mount Stainless Steel Liquid Level Switches
The Whitman Controls L40 / L45 Series 1″ Cylinder Vertical Mount Stainless Steel Liquid Level Switches have both a stainless steel stem and float affording the user high performance and versatility. These levels are most commonly seen in OEM and various other industrial applications. These are used in potable water, hot water, and in various acids and solvents as the Whitman Red Seal potting compound allows the switches to be submersible to a NEMA 6 rating.
-
JergusonJerguson V-Series Bronze Tubular Glass & Valve Sets, Tubular Glass Level Gages, Liquid Level Valves for Tubular Glass Gages
The Jerguson V-Series bronze gage valves feature VA & VC Automatic and VB & VE Non-Automatic glass gage valves. The VA Automatic series comes complete with corrosive-resistant ballchecks for automatic closure in the event of glass breakage. The VB Non-Automatic series is similar to the VA series except ballchecks are not standard, thus making operation non-automatic. The VC Automatic series conforms to ASME power-boiler code requirements and feature stainless steel ballchecks in both upper and lower units, thus providing automatic closure in the event of glass breakage. The VE Non-Automatic series is nearly identical in every aspect to the above models, except for the non-automatic design and ballchecks are not included.
-
JergusonJerguson Magnicator WF Series Wide Magnetic Flag Liquid Level Indicators
Jerguson recommends flag indicators for virtually all applications, therefore flags come as standard on all Magnicator® products. The Magnicator WF series of flag style liquid level indicators are the most reliable, shock resistant, longest lasting magnetic level indicators available, and now they’re also the widest! The Jerguson WF Series wide indicator flags are 1 1/2″ (38.10mm) wide, have single stainless steel stamping, a permanent magnet in each flag, and dual rotation points. At rest, each flag is strongly attracted to each adjacent flag of the same color, with an active magnetic field of 200 Gauss at the leading edges. This attraction can only be broken by a magnetic field strong enough to cause the flags to rotate.