Product Specs
Temperature Range
100°F (38°C) to 800° (427°C)
Pressure Ranges
Reflex: 710 psi (49.0 barg) -2,400 psi (165.5 barg)
Transparent: 180 psi (12.4 barg) -1,200 psi (82.7 barg)
Gage Connection
NPT
Socket Weld
Glass Material
Aluminosilicate
Borosilicate
HP Borosilicate
Jerguson Series L10 Large Chamber Liquid Level Gages for Boiling / Flashing Liquids, Reflex and Transparent Armored Flat Glass Gages
Jerguson, Level Gauges, Liquid Level Instruments
Jerguson Series L10 Large Chamber Liquid Level Gages for Boiling / Flashing Liquids, Reflex and Transparent Armored Flat Glass Gages
The Jerguson Series L10 large chamber liquid level gages are designed to give an accurate liquid level reading of liquids that have a tendency to surge or boil. These armored glass gages are highly effective in reducing the boiling effects of entrained gas being released under low pressure. They are effective at eliminating level fluctuations that occur in standard gages with small chambers when boiling / flashing vapors try to rise to the surface. Jerguson Series L 10 large chamber armored glass gages are available in reflex or transparent design. The liquid chamber is constructed of heavy tubing, carefully slotted, and machined to provide plane seats for the gaskets and glass assemblies. Covers are steel secured with specially designed steel bolts.
Related products
-
JergusonJerguson SAS-16 Tri-Magnet Magnetic Latching Snap-Action Point Level Switches
The Jerguson SAS-16 Snap-Action Switch is a switch mechanism based on a unique Jerguson tri-magnet design where the snap action is accomplished by the utilization of magnetic repulsion. The magnet mounted in the float causes the secondary magnet to rotate as it passes up and down. The switch magnet is repelled by the secondary and snaps to the opposite side. This causes the cradle to pivot, moving the push rod which operates the switch contacts. The result is positive snap action interlock switching – no springs, no cams, no problems.
-
JergusonJerguson Series 300L Liquid Level Gages, Reflex R-300L and Transparent T-300L, Armored Flat Glass Gages, ANSI 300
The Jerguson Series 300L liquid level gages are lower cost with increased visible ranges. The series 300L provides a more visible range per gage section at an economical price. This glass gage series uses the proprietary Jerguson 25mm glass, which is thinner, narrower, and longer than traditional gage glass. The Series 300L features a recessed gasket surface, bar-stock non-shrouded covers, and ASTM grade bolting. Due to the length of each gage section this model is not recommended for high pressure steam service. All Jerguson armored flat glass gages are hydrostatically tested prior to shipment at 1 1/2 times the design pressure rating at 100°F (38°C).
-
JergusonJerguson Magnicator Flashproof Magnetic Flag Liquid Level Indicators for Boiling Fluids or Flashing Vapors
The Jerguson FlashProof™ Magnicator design addresses problems that may occur with standard level indicators: boiling fluids, flashing vapors, and problems caused by dirty or viscous services. This design provides an accurate float level and indicator reading, and allows the gage to be flushed without removing the float from the column.
-
JergusonJerguson 136 Series Tubular Glass & Valve Sets, Tubular Glass Level Gages, Liquid Level Valves for Tubular Glass Gages
The Jerguson No. 136 Standard valve for tubular glass gages has a standard straight-through flow design featuring a durable cast aluminum wheel. Connections of 1/2″ or 3/4″ NPT are available for attaching the valve to the vessel.